Hello Every body...
I am a newbie here, I'm confuse, I setup vpn server on internet, for example with 91.99.33.46 and I connect with my client correctly and don't have problem and get IP from my NAT 192.168.30.11
but I want my client get or set valid IP until my client reachable from internet...
and my range is 97.22.33.120 to 125
I don't know what should I do...?
please Help me...
IP Public
-
- Posts: 202
- Joined: Wed Jul 10, 2013 2:07 pm
Re: IP Public
Where is the NAT, you are speaking about? On Client side?
Basicly, you should bridge (on server side) the vpn-hub to the phys. ethernet-adapter and check, that Secure-NAT is disabled.
On client side, you set IP/netmask manual and maybe add/modify some routes on the client.
Alternativ, you bridge to new created tap-device. Give the TAP-Device the IP 97.22.33.120. On Client, you set IP to 97.22.33.121, netmask to 255.255.255.240 and gateway to 97.22.33.120.
But without any more details about your config/OS etc, nobody can help you.
Basicly, you should bridge (on server side) the vpn-hub to the phys. ethernet-adapter and check, that Secure-NAT is disabled.
On client side, you set IP/netmask manual and maybe add/modify some routes on the client.
Alternativ, you bridge to new created tap-device. Give the TAP-Device the IP 97.22.33.120. On Client, you set IP to 97.22.33.121, netmask to 255.255.255.240 and gateway to 97.22.33.120.
But without any more details about your config/OS etc, nobody can help you.
-
- Posts: 5
- Joined: Wed Sep 10, 2014 3:13 pm
Re: IP Public
Excuse me...
Dear qupfer
I'm beginner in softether ...
can you explain more details... I did that setting but not work...
I appreciate for you help...
Thank you...
Dear qupfer
I'm beginner in softether ...
can you explain more details... I did that setting but not work...
I appreciate for you help...
Thank you...
-
- Posts: 202
- Joined: Wed Jul 10, 2013 2:07 pm
Re: IP Public
Sorry, if my post sounded rude. It was not intended.
But, if I or anybody else should help, you must post more detailed information. How looks your client-side network, how looks your server-side network. Which OS you are using for server and client, do you use the windows GUI or vpncmd and stuff like that. Please try to be accurate as possible.
But, if I or anybody else should help, you must post more detailed information. How looks your client-side network, how looks your server-side network. Which OS you are using for server and client, do you use the windows GUI or vpncmd and stuff like that. Please try to be accurate as possible.