win 7 x64
se vpn client 4.15.0.9546.
I'm set checkbox "no adju.....".
and route prrint show me route to vpn
not workin "no adjustment of rroute table"
-
- Posts: 137
- Joined: Mon Mar 24, 2014 3:59 am
Re: not workin "no adjustment of rroute table"
This is a known problem.
You might get the desired behavior by creating a second VPN adapter and using it instead of the first VPN adapter where the default route option is glitching.
You might get the desired behavior by creating a second VPN adapter and using it instead of the first VPN adapter where the default route option is glitching.
-
- Posts: 3
- Joined: Tue Apr 07, 2015 9:43 pm
Re: not workin "no adjustment of rroute table"
it didn't help
-
- Posts: 202
- Joined: Wed Jul 10, 2013 2:07 pm
Re: not workin "no adjustment of rroute table"
Its not the SoftEther Client that will change your routes. It's Windows (or whatever you use) ;-)
SoftEther creates a so called "Layer 2" vpn, which mean its a virtual LAN-Cable and Device. If you are conected, it looks for Windows (or other) like you have pluged in a new cable.
And windows run a dhcp-client and if a dhcp-server exisit which gives a default-gateway --> route created
To avoid this, you have two possibilities.
Eays one: manual IP configuration of the VPN-Device (and leaving gateway empty). Maybe add some special routes also manual.
more complex option: use a configurable dhcp-server and configure it correctly to send an "empty" dhcp-option number 3 ;-)
I think the function in the client is just for the SoftEther Layer3 Switiching function.
SoftEther creates a so called "Layer 2" vpn, which mean its a virtual LAN-Cable and Device. If you are conected, it looks for Windows (or other) like you have pluged in a new cable.
And windows run a dhcp-client and if a dhcp-server exisit which gives a default-gateway --> route created
To avoid this, you have two possibilities.
Eays one: manual IP configuration of the VPN-Device (and leaving gateway empty). Maybe add some special routes also manual.
more complex option: use a configurable dhcp-server and configure it correctly to send an "empty" dhcp-option number 3 ;-)
I think the function in the client is just for the SoftEther Layer3 Switiching function.
-
- Posts: 3
- Joined: Tue Apr 07, 2015 9:43 pm
Re: not workin "no adjustment of rroute table"
qupfer wrote:
> Eays one: manual IP configuration of the VPN-Device (and leaving gateway empty).
> I think the function in the client is just for the SoftEther Layer3 Switiching
> function.
It's solve problem, but manual configuration is bad.
and this chekbox is confusing, the receiving net configuration is in the SE window.
> Eays one: manual IP configuration of the VPN-Device (and leaving gateway empty).
> I think the function in the client is just for the SoftEther Layer3 Switiching
> function.
It's solve problem, but manual configuration is bad.
and this chekbox is confusing, the receiving net configuration is in the SE window.