Layer 3 switch

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
dhs9004
Posts: 5
Joined: Mon Aug 22, 2016 3:33 pm

Layer 3 switch

Post by dhs9004 » Sat Nov 03, 2018 2:05 am

Hi, I need to connect two sites with a different subnet address.

I think that my best option is to have two different Softether virtual Hub and connect it through the Layer 3 switch. Am I right??????

I have one Rasberry pi on each site running OpenVPN, and they are connected to two different Virtual Hub Softether Server(Demo1 and Demo2). I can get access to all the device behind the Raspberry Pi, but I have to be connected to two different hubs to talk with both at the same time. So my goal is to fix that :-)

I started to configure the Layer 3 switch on my server, I added a Virtual interface for each of my virtual Hub and I also added a static route on my client

Site 1 : 10.0.1.0 /24
Virtual interface 10.0.1.254
Static route 10.0.2.0/255.255.255.0/10.0.1.254

Site 2 : 10.0.2.0 /24
Virtual interface 10.0.2.254
Static route 10.0.1.0/255.255.255.0/10.0.2.254

I don't know what else I have to do, so any suggestion is more than appreciate.

Image

Thanks a lot,
Daniel

thisjun
Posts: 2200
Joined: Mon Feb 24, 2014 11:03 am

Re: Layer 3 switch

Post by thisjun » Thu Nov 15, 2018 8:10 am

Could you show the routing table and result of traceroute?

Post Reply