It is currently Wed Aug 23, 2017 3:37 pm

All times are UTC




Post new topic Reply to topic  [ 12 posts ] 
Author Message
PostPosted: Sat May 13, 2017 7:32 pm 

Joined: Sat May 13, 2017 6:39 pm
Posts: 7
Hello!
Is this the correct state of the bridge? So it should be?
(CentOS 7.2)

VPN Server/BRIDGE>sessionget sid-link-2
SessionGet command - Get Session Information
Item |Value
-----------------------------------------------+----------------------------------------
User Name (Authentication) |Cascade
VLAN ID |-
Server Product Name |SoftEther VPN Bridge (64 bit)
Server Version |4.22
Server Build |Build 9634
Connection Started at |2017-05-13 (Sat) 14:17:38
First Session has been Established since |2017-05-13 (Sat) 14:17:38
Current Session has been Established since |2017-05-13 (Sat) 14:17:38
Half Duplex TCP Connection Mode |No (Full Duplex Mode)
VoIP / QoS Function |Enabled
Number of TCP Connections |0
Maximum Number of TCP Connections |0
###
Encryption |Disabled (No Encryption)
###
Use of Compression |No (No Compression)
UDP Acceleration is Supported |No
UDP Acceleration is Active |No
Session Name |SID-LINK-2


VPN Server/VPNL2>sessionget sid-admin-2
SessionGet command - Get Session Information
Item |Value
------------------------------------------+----------------------------------------
Client IP Address |10.0.2.16
Client Host Name |10.0.2.16
User Name (Authentication) |admin
User Name (Database) |admin
VLAN ID |-
Server Product Name |SoftEther VPN Server (64 bit)
Server Version |4.22
Server Build |Build 9634
Connection Started at |2017-05-13 (Sat) 14:17:38
First Session has been Established since |2017-05-13 (Sat) 14:17:38
Current Session has been Established since|2017-05-13 (Sat) 14:17:38
Half Duplex TCP Connection Mode |No (Full Duplex Mode)
VoIP / QoS Function |Enabled
Number of TCP Connections |8
Maximum Number of TCP Connections |8
###
Encryption |Enabled (Algorithm: AES256-SHA)
###
Use of Compression |No (No Compression)
Physical Underlay Protocol |Standard TCP/IP (IPv4)
UDP Acceleration is Supported |No
UDP Acceleration is Active |No
Session Name |SID-ADMIN-2


Top
 Profile  
Reply with quote  
PostPosted: Thu May 18, 2017 9:53 am 

Joined: Sat May 13, 2017 6:39 pm
Posts: 7
Hey guys, can you explain to me whether this is a problem or not?

Thanks.


Top
 Profile  
Reply with quote  
PostPosted: Wed May 31, 2017 4:57 am 

Joined: Mon Feb 24, 2014 11:03 am
Posts: 2292
If destination of cascade is localhost, encryption isn't used for.


Top
 Profile  
Reply with quote  
PostPosted: Wed May 31, 2017 9:01 am 

Joined: Sat May 13, 2017 6:39 pm
Posts: 7
If the connection is from the server side?

vpnsrv(10.0.2.15) <----> vpnbr(10.0.2.16)


[root@vpnsrv vpnserver]# ./vpncmd
...
...
Hostname of IP Address of Destination: 10.0.2.16:443
...
...
VPN Server/BRIDGE>sessionget sid-link-3
...
...
Encryption | Disabled (No Encryption)


Top
 Profile  
Reply with quote  
PostPosted: Thu Jun 15, 2017 4:49 am 

Joined: Mon Feb 24, 2014 11:03 am
Posts: 2292
Are these hosts clone?
If host identity are same, SoftEther VPN recognize destination is localhost.


Top
 Profile  
Reply with quote  
PostPosted: Fri Jun 16, 2017 2:27 pm 

Joined: Sat May 13, 2017 6:39 pm
Posts: 7
Initially I tested in a virtualbox on Mac. VMs were clones.
After that I tested it in vmware. Virtual machines are located on two hosts:
hostesxi1 and hostesxi2.
Result as in the previous post:
####
...
VPN Server/BRIDGE>sessionget sid-link-...
...
...
Encryption | Disabled (No Encryption)
####

On the vpnbridge I done the following settings:
hub BRIDGE
CascadeCreate ...
CascadePasswordSet ...
CascadeOnline ...


Top
 Profile  
Reply with quote  
PostPosted: Thu Jun 29, 2017 7:58 am 

Joined: Mon Feb 24, 2014 11:03 am
Posts: 2292
Please try to change host name of guest on the VM.


Top
 Profile  
Reply with quote  
PostPosted: Sat Jul 01, 2017 7:51 am 

Joined: Sat May 13, 2017 6:39 pm
Posts: 7
I changed the names of all VM hosts. Installed VM on hosts KVM and ESXi.


Top
 Profile  
Reply with quote  
PostPosted: Wed Jul 12, 2017 6:39 am 

Joined: Mon Feb 24, 2014 11:03 am
Posts: 2292
Could you share the result?


Top
 Profile  
Reply with quote  
PostPosted: Thu Jul 13, 2017 11:51 am 

Joined: Sat May 13, 2017 6:39 pm
Posts: 7
Here are the logs and the connection diagram


Attachments:
File comment: log
log_vpn.txt [14.35 KiB]
Downloaded 20 times
File comment: diagram
conn.png
conn.png [ 69.65 KiB | Viewed 959 times ]
Top
 Profile  
Reply with quote  
PostPosted: Fri Jul 28, 2017 5:03 am 

Joined: Mon Feb 24, 2014 11:03 am
Posts: 2292
"SessionGet" command is showing status of session between virtual cascade device and virtual hub.
This is meaningless.

Please check status by "CascadeStatusGet" command.


Top
 Profile  
Reply with quote  
PostPosted: Sun Jul 30, 2017 11:15 am 

Joined: Sat May 13, 2017 6:39 pm
Posts: 7
Thank you!

A few more questions:
1. Will the MakeCert4096 command be added to one of the following versions?
2. Can I add /SetPassphrase to the MakeCert?


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Return to www.softether.org