LAN to LAN L3 routing with mikrotik as client

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
porkyz
Posts: 1
Joined: Fri Aug 11, 2017 7:09 pm

LAN to LAN L3 routing with mikrotik as client

Post by porkyz » Fri Aug 11, 2017 7:25 pm

Here is my condition:
1. Setup 1 SoftEther VPN server,with 1 HUB, L3 switch IP address to 1 HUB is 10.13.13.88. I have routing table with entries:
a. Network address: 10.10.2.0, subnet mask: 255.255.255.0, Gateway address: 10.13.13.101, metric 10
b. Network address 10.10.1.0, subnet mask: 255.255.255.0, Gateway address: 10.13.13.100, metric 10

2. Headquarter LAN which managed with mikrotik (connect to SoftEther via mikrotik VPN), managed to set local VPN address as 10.13.13.100, LAN network address is 10.10.1.0/24

3. Branch LAN also using mikrotik connect to SoftEther), local VPN address as 10.13.13.101. LAN network address is 10.10.2.0/24

What I've accomplished:
1. From headquarter mikrotik I succeed to ping 10.13.13.88 and 10.13.13.101
2. From branch mikrotik I succeed to ping 10.13.13.88 and 10.13.13.100

What I can't do are:
1. From headquarter mikrotik, I can't ping 10.10.2.1 (which is mikrotik LAN IP address)
2. From branch mikrotik, I can't ping 10.10.1.1 (which is mikrotik LAN IP address)

What else am I missing in setting up the SoftEther server?

Any help will be appreciated. Thanks in advance

--
Regards,
PorKyz

thisjun
Posts: 2417
Joined: Mon Feb 24, 2014 11:03 am

Re: LAN to LAN L3 routing with mikrotik as client

Post by thisjun » Thu Sep 07, 2017 7:35 am

How about use static route pushing function of DHCP?

Did you configure route on both mikrotik?

Post Reply