I have three network adapter in my windows 10.
1. TPLink USB Network Adapter TL-WN822N
2. Virtual Machine Network Adapter
3. Relteck Network Adapter with my mainboard
However in bridgedevicelist, there are only 2&3 in list.
[Bug Report]Cannot recognize Local USB Network Adapter
-
- Posts: 15
- Joined: Fri May 20, 2016 8:07 am
-
- Posts: 65
- Joined: Sun Dec 15, 2013 8:34 am
-
- Posts: 15
- Joined: Fri May 20, 2016 8:07 am
Re: [Bug Report]Cannot recognize Local USB Network Adapter
UkrZilla wrote:
> It is not bug
>
> 3.6.6
>
> https://www.softether.org/4-docs/1-manu ... al_Bridges
Should I set NoPromiscuousMode to true?
> It is not bug
>
> 3.6.6
>
> https://www.softether.org/4-docs/1-manu ... al_Bridges
Should I set NoPromiscuousMode to true?
-
- Posts: 65
- Joined: Sun Dec 15, 2013 8:34 am
Re: [Bug Report]Cannot recognize Local USB Network Adapter
I would reccomend you don't use local bridge for this net card and use VirtualNat.
In order to have access from VirtualNAT to server you can:
1. Connect from server to localhost
or
2. Disable Kernel mode NAT
In order to have access from VirtualNAT to server you can:
1. Connect from server to localhost
or
2. Disable Kernel mode NAT
-
- Posts: 15
- Joined: Fri May 20, 2016 8:07 am
Re: [Bug Report]Cannot recognize Local USB Network Adapter
UkrZilla wrote:
> I would reccomend you don't use local bridge for this net card and use
> VirtualNat.
> In order to have access from VirtualNAT to server you can:
>
> 1. Connect from server to localhost
> or
> 2. Disable Kernel mode NAT
thank you for your advice. I have little knowledge about VirtualNAT, let me start a quick learning, :-)
> I would reccomend you don't use local bridge for this net card and use
> VirtualNat.
> In order to have access from VirtualNAT to server you can:
>
> 1. Connect from server to localhost
> or
> 2. Disable Kernel mode NAT
thank you for your advice. I have little knowledge about VirtualNAT, let me start a quick learning, :-)