Manipulate local host file of VPNClient

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
mstenz
Posts: 42
Joined: Wed Mar 19, 2014 9:36 pm

Manipulate local host file of VPNClient

Post by mstenz » Tue May 06, 2014 4:58 pm

Hi,

I have many Servers in my network that is connected via VPN. This means if a client establish a VPN connection there is posibility to connect to many different IP addresses in different networks via the tunnel.
it is very hard to remember all that names. But as the local client use a DNS-Server that cannot resovle that names to the IP's, i cannot currently use the dns names instead of the IP addresses. Question is now, is there any possibilty that I can script something to allow adding (export) from the DNS-Server in my VPN-Network the names and add them to the local host file of the client?
Or allow the client to ask different DNS-Servers (add a 3rd DNS-Server to network configuration) even if DHCP is enabled?
thx.

rgds.

Michael

thisjun
Posts: 2458
Joined: Mon Feb 24, 2014 11:03 am

Re: Manipulate local host file of VPNClient

Post by thisjun » Wed May 14, 2014 6:02 am

SoftEther DHCP of SecureNAT support only 2 DNS.

mstenz
Posts: 42
Joined: Wed Mar 19, 2014 9:36 pm

Re: Manipulate local host file of VPNClient

Post by mstenz » Thu May 15, 2014 7:03 pm

Hi,
but my request was to manipulate the local hosts file, not to add more DNS Servers to the SecureNAT function.
rgds.

Michael

Post Reply