Hi,
I have installed SE server on CENTOS on vmware (two nics: public a.b.c.8 and local 192.168.128.150)
Configured by SEwindowsAdministrator. Run, works fine (whatmyip address shows a.b.c.8 on client)
But there is a problem. Client cant see local network (192.168.128.0)
Local network is vlan 30 (there are vmware ESxi 192.168.128.170, Dell MD3220 - 192.168.128.101 and APC ups in remote location (other building) - 192.168.128.130)
Ping from vpn client works only to 192.168.128.130. I can ping from client to 192.168.128.170, 192.168.128.101 only few seconds after restart vpn server, after it stops.
Ping from 192.168.128.150 (vpn server nic2) works to all IP in 192.168.128.0/24
Where is the problem? (I have tested fresh installations on fedora, ubuntu - the same result; ping only to 192.168.128.130)
Regards
Routing problem or...
-
- Posts: 2458
- Joined: Mon Feb 24, 2014 11:03 am
Re: Routing problem or...
Could you explain more about configuration?
Use localbridge? Use SecureNAT? How to assign an IP address? etc.
Use localbridge? Use SecureNAT? How to assign an IP address? etc.