Hello!
I set up the SE VPN Server in virtual network on Proxmox, where is also other VPS (some corp.services) - 192.168.51.0/24.
Create Hub, Local Bridge with virtual interface TAP (manual set address), DHCP. Forwarded ports from external Server Proxmox.
Remote clients connect to services of virtual network (through P2TP/IPsec, SSTP).
VPN network: 192.168.71.0/24.
Use routing:
VPN Net -> Virtual Net 1: 192.168.51.0/24 gw 192.168.71.1
Virtual Net 1 -> VPN Net: 192.168.71.0/24 gw 192.168.51.106
This config work fine some years.
Next step, i want to add resources from second remote server, also Proxmox (Server-2),
that would clients can connect to Virtual Net 2 (to VPS) on Server-2 (some other corp.services) - 192.168.52.0/24.
On Server-2 set up SE VPN Bridge on Virtual Net 2, create Hub-Bridge, Local Bridge with eth0.
On SE VPN Server/Server-1 create Hub-02 (with user for cascade), second interface eth1 (manual set address), Local Bridge Hub-02/eth1.
On SE VPN Bridge/Server-2 create cascade from Hub-Bridge to Hub-02/SE VPN Server/Server-1.
Cascade connecting - established, - OK.
I was going to make routing similary (through interfaces SE VPN Server/Server-1: tap,eth0,eth1), but issue:
Not ping (Destination Host Unreachable):
From SE VPN Bridge/Server-2 eth0/192.168.52.100 to SE VPN Server/Server-1 eth1/192.168.52.106 (inside Hub-02, cascade connection), and back.
Wherein, in IP address tables Hubs ip-addresses are present.
I don't understand what's wrong :(
Help, please!
Thanks.
[Solved] Join virtual network issue (cascading, local bridge)
-
- Posts: 2
- Joined: Mon Aug 19, 2019 6:00 am
[Solved] Join virtual network issue (cascading, local bridge)
You do not have the required permissions to view the files attached to this post.
Last edited by Simakov on Sat Sep 21, 2019 6:53 pm, edited 1 time in total.
-
- Posts: 2
- Joined: Mon Aug 19, 2019 6:00 am
Re: Join virtual network issue (cascading, local bridge)
Hello, again!
It work! Enough to replace on VPN Server/Server eth1 with second tap (tap2), i.e. Local Bridge Hub-02/tap2.
Like this: Layer 3 IP routing without switch.
It work! Enough to replace on VPN Server/Server eth1 with second tap (tap2), i.e. Local Bridge Hub-02/tap2.
Like this: Layer 3 IP routing without switch.
You do not have the required permissions to view the files attached to this post.