SoftEther VPN Client Not Working correctly

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
Posts: 1
Joined: Fri Jan 24, 2020 11:50 am

SoftEther VPN Client Not Working correctly

Post by zgasparian » Sat Jan 25, 2020 3:44 pm

Softether VPN server works fine and i am able to connect to the server through windows VPN client.
the issue starts from here, when i try to use Softether VPN client instead. when it connects to the server,DNS resolution stops and i am only able to ping the addresses over internet based on IP address. but ping is not available with FQDN.
Also need to add that i am connecting to port 443 to the server.
Any ideas ?

Posts: 309
Joined: Wed Sep 18, 2013 1:49 pm

Re: SoftEther VPN Client Not Working correctly

Post by centeredki69 » Sun Jan 26, 2020 6:36 pm

Hello zgasparian,

What OS is the SE server installed on ? (Linux, Windows ect.) Is it on hardware or is it virtual? If Virtual Is it hosted on a cloud service( azure , AWS ect.) or your hardware.

On the SE server are you using "secureNAT" or a "local bridge"?

Which windows protocol is the native windows VPN client using when it connects and works( L2TP/ipsec, MS-SSTP)

When connecting to the SE server with the SE client do you get a popup saying you received an IP address? ---see below
Ip address.jpg
You do not have the required permissions to view the files attached to this post.

Post Reply