VPN Server with Secure NAT without DHCP Server enabled

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
stevenjude
Posts: 1
Joined: Sun Feb 16, 2020 7:59 am

VPN Server with Secure NAT without DHCP Server enabled

Post by stevenjude » Thu May 07, 2020 10:11 pm

Hi ,

How can I configure the VPN Server with SecureNAT without DHCP Server Enabled and to assign a static network IP address to each user? Please advise if and how this can be done, to limit each user to a single fixed IP.

Thank you in advance.

Steven

papito
Posts: 3
Joined: Sat Mar 21, 2020 2:15 pm

Re: VPN Server with Secure NAT without DHCP Server enabled

Post by papito » Thu May 21, 2020 11:19 am

Hi Steven,

the only way you have to do this, is to assign a static IP in the client´s network card.

And really you don´t need to active Secure NAT, when you this don´t need.


Regards

Sandro

drkrool
Posts: 47
Joined: Mon May 25, 2020 4:38 am
Location: Quebec, Canada

Re: VPN Server with Secure NAT without DHCP Server enabled

Post by drkrool » Thu May 28, 2020 11:08 am

Maybe you could make another machine with your preferred DHCP server that connects as a client to the securenat and would answer to DHCP querries. I don't remember if each securenat client can talk to each other or if they can only talk to the server.

I haven't tested this, but if it can inspire you

Post Reply