Вопрос
-
- Posts: 97
- Joined: Mon May 25, 2020 4:38 am
- Location: Quebec, Canada
Re: Вопрос
It's the same way you would open a port in your network if a new device was connected via ethernet. You open the port in your firewall and point it to the device's ip. You off course need access to the firewall to do this or need that the server be in a DMZ (or basically have an internet IP directly on the network card)
-
- Posts: 2
- Joined: Wed May 27, 2020 3:07 pm
Re: Вопрос
Это есть норм ip у сервера белый. просто интересно как через софт перебросить порт на впн клиента? Сори на форуме впервые. Если, что-то не точно простите.