how to support radius on opensource version?

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
xiaowei.zhang
Posts: 10
Joined: Sun Jun 28, 2020 10:28 am

how to support radius on opensource version?

Post by xiaowei.zhang » Wed Jul 01, 2020 12:38 pm

hi, everyone
I have used SoftEther for a while. it is really great!
now, I am configuring SoftEther with Radius authentication。 but when i created users for Radius authenciation, it always failed with one nontication, "Radius is not avaliable for opensource version."
if radius is only supported for commercial version, who is the right person to make the deal?

Thank you very much.

Xiaowei

drkrool
Posts: 93
Joined: Mon May 25, 2020 4:38 am
Location: Quebec, Canada

Re: how to support radius on opensource version?

Post by drkrool » Fri Jul 31, 2020 2:41 am

Great question, but I tought the commercial version of softether was pre-opensource.

Maybe ask the devs on the softether's dev team github to be sure

andrewfer000
Posts: 8
Joined: Wed May 27, 2020 4:07 am

Re: how to support radius on opensource version?

Post by andrewfer000 » Sat Aug 01, 2020 1:47 pm

Based on what I know, there is no commercial version of SoftEther VPN and all traces of PacketIX VPN server (the old commercial software SE is from) is basically gone. All that is left is the "Opensource" version. If anything I would make sure that your server configuration is correct and that you are using a more recent version of SoftEther VPN server and not the older SoftEther-Stable since that version may still be missing some of the commercial features.

xiaowei.zhang
Posts: 10
Joined: Sun Jun 28, 2020 10:28 am

Re: how to support radius on opensource version?

Post by xiaowei.zhang » Thu Aug 13, 2020 3:21 am

I got the binary from https://www.softether-download.com/cn.aspx. and the server info page says version 4.34 Build 9745, compiled 2020/04/05 23:20:52, and it is SoftEther VPN server (64bit) (opensource).
which version are you using?

xiaowei.zhang
Posts: 10
Joined: Sun Jun 28, 2020 10:28 am

Re: how to support radius on opensource version?

Post by xiaowei.zhang » Thu Aug 13, 2020 5:35 am

I found the famous remark by the author, Daiyuu Nobori. As a programmer, I handled it.

Thanks a lot to Daiyuu Nobori, and every one.

Post Reply