Cluster: Change the type hub and DHCP in Static Hub

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
ngocdv
Posts: 1
Joined: Thu Jul 16, 2020 4:04 am

Cluster: Change the type hub and DHCP in Static Hub

Post by ngocdv » Thu Jul 16, 2020 4:20 am

Hi all,

I have 2 questions for everyone to clarify and guide.
1. I cannot change the types of static virtual hub into dynamic virtual hub and vice versa.
2. I cannot configure DHCP for static virtual hubs although the documentation says possible

https://www.softether.org/4-docs/1-manu ... Clustering

3.9.7 Static Virtual Hubs
Virtual Hubs not using clustering are not particularly classified, but in a clustering environment they are classified into two types: static Virtual Hubs and dynamic Virtual Hubs. While the Virtual Hub's type has to be designated upon creation, it is also possible to change the type at a later date.

3.9.11 Functions not Available Simultaneously with Clustering
When the clustering function is enabled, the following functions cannot be used at the same time.
Cascade Connections
(it is possible to receive a cascade connection from a separate computer)
Virtual NAT
(virtual DHCP Server function work)

We hope everyone can advise me.
Thank you very much

drkrool
Posts: 93
Joined: Mon May 25, 2020 4:38 am
Location: Quebec, Canada

Re: Cluster: Change the type hub and DHCP in Static Hub

Post by drkrool » Fri Jul 31, 2020 1:55 am

Try making the server part of the clister, stopping the hub, and the option could become available. To be honnest I haven't got a setup at the moment to try this one, let me know if it doesn't work, I'll try it before answering something else

Post Reply