Communication between different HUB

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
Posts: 2
Joined: Fri Mar 06, 2020 11:04 am

Communication between different HUB

Post by Raziel » Tue Aug 04, 2020 8:46 am


I try to make interconnexion between different HUB which will allow me to make communicate the clients of different hubs with each other, firstly i made a "virtual layer 3 switch" in wich i make interfaces for all my HUB, as it says IP routing will/should be automatic

After many test i've suceed but only by addind manuelly all my routes on my windows clients my question is if there is a way to make the communication more easier or does i have to configure the routes for all my windows client manuelly


Posts: 10
Joined: Sun Jun 28, 2020 10:28 am

Re: Communication between different HUB

Post by xiaowei.zhang » Wed Aug 12, 2020 6:04 am

if you want to push route to clients, maybe you can try hub -> virtual hub properties -> virtual nat and dhcp server(secureNAT) -> secureNAT configuration -> edit the static routing table to push. I have tried it and it worked well.

BTW, how can you make the interconnection between different HUBs by L3 switch? I have two hubs, one for, the other for and I have enabled secureNAT for both hubs and created L3 switch, virtual interfaces, routing table for them. but client in still cannot access that in Can you help me how to config it ?

Post Reply