The open source version does not support routing table push function

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
dengb
Posts: 3
Joined: Sat Aug 15, 2020 1:09 pm

The open source version does not support routing table push function

Post by dengb » Sat Aug 15, 2020 1:23 pm

I don't need to use the gateway function, but I need to separately IP proxy out. So this feature is not open for the time being in the open source version or other versions should be used?
Image
Image

xiaowei.zhang
Posts: 10
Joined: Sun Jun 28, 2020 10:28 am

Re: The open source version does not support routing table push function

Post by xiaowei.zhang » Sun Aug 16, 2020 3:12 pm

some functions have been disabled on Chinese locale for some reason. you can try either
1. use one server other than CN or JP. for example, English version linux and windows.
2. modify the source code.

dengb
Posts: 3
Joined: Sat Aug 15, 2020 1:09 pm

Re: The open source version does not support routing table push function

Post by dengb » Wed Feb 24, 2021 1:18 am

thank you for your reply。
1. No language works
2. No ability to modify the source code

lawsangel
Posts: 15
Joined: Fri Feb 19, 2021 6:04 pm

Re: The open source version does not support routing table push function

Post by lawsangel » Thu Feb 25, 2021 4:40 pm

Try changing the virtual network adapters metric to 200.
That should now route the traffic locally.

psyche
Posts: 16
Joined: Tue Oct 08, 2019 8:55 am

Re: The open source version does not support routing table push function

Post by psyche » Thu Mar 04, 2021 5:40 pm

This is a good solution

Post Reply