Connect from TPLink MR6400

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
marcoahp
Posts: 1
Joined: Thu Oct 08, 2020 11:09 am

Connect from TPLink MR6400

Post by marcoahp » Thu Oct 08, 2020 11:49 am

I'm trying to connect from a TPLink MR6400 to SoftEther with L2TP/IPSec. The connection stablish, but it doesn't assign me any IP.
This is the log:
2020-10-08 13:02:18.523 IPsec Client 6 (176.83.214.169:63011 -> 192.168.0.110:500): A new IPsec client is created.
2020-10-08 13:02:18.523 IPsec IKE Session (IKE SA) 6 (Client: 6) (176.83.214.169:63011 -> 192.168.0.110:500): A new IKE SA (Aggressive Mode) is created. Initiator Cookie: 0x5861E5411CA85B5A, Responder Cookie: 0x1192AFCC1FFDE722, DH Group: MODP 1024 (Group 2), Hash Algorithm: MD5, Cipher Algorithm: 3DES-CBC, Cipher Key Size: 192 bits, Lifetime: 4294967295 Kbytes or 3600 seconds
2020-10-08 13:02:18.524 IPsec Client 6 (176.83.214.169:63011 -> 192.168.0.110:500):
2020-10-08 13:02:18.712 IPsec IKE Session (IKE SA) 6 (Client: 6) (176.83.214.169:63011 -> 192.168.0.110:500): This IKE SA is established between the server and the client.
2020-10-08 13:02:18.882 IPsec IKE Session (IKE SA) 6 (Client: 6) (176.83.214.169:63011 -> 192.168.0.110:500): The client initiates a QuickMode negotiation.
2020-10-08 13:02:18.882 IPsec ESP Session (IPsec SA) 8 (Client: 6) (176.83.214.169:63011 -> 192.168.0.110:500): A new IPsec SA (Direction: Client -> Server) is created. SPI: 0xCF3D4BA3, DH Group: (null), Hash Algorithm: MD5, Cipher Algorithm: 3DES-CBC, Cipher Key Size: 192 bits, Lifetime: 4294967295 Kbytes or 3600 seconds
2020-10-08 13:02:18.882 IPsec ESP Session (IPsec SA) 8 (Client: 6) (176.83.214.169:63011 -> 192.168.0.110:500): A new IPsec SA (Direction: Server -> Client) is created. SPI: 0x3CBD600, DH Group: (null), Hash Algorithm: MD5, Cipher Algorithm: 3DES-CBC, Cipher Key Size: 192 bits, Lifetime: 4294967295 Kbytes or 3600 seconds
2020-10-08 13:02:19.002 IPsec ESP Session (IPsec SA) 8 (Client: 6) (176.83.214.169:63011 -> 192.168.0.110:500): This IPsec SA is established between the server and the client.
How could I do it? I want to connect the server on MR6400 side from the computer with SoftEther.
Thanks

Post Reply