Simple problem but I can't figure out

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
dansleboby
Posts: 1
Joined: Sun Mar 21, 2021 9:57 am

Simple problem but I can't figure out

Post by dansleboby » Sun Mar 21, 2021 10:00 am

Hi,
I have 2 NIC on my server
eno1 -> with a public ip 51.*.*.*
eno2 -> configure with static ip 192.168.111.1/24

I install the VPN server and client, on the client side I set a static ip 192.168.111.2/24 but I can't access 192.168.111.1 from my pc

I add eno1 and eno2 in the local bridge

My Goal it to have a local IP on an interface only accessible through the VPN for listening cert app only on a local address like admin interface

Thanks for help

PS: server => Debian 10, client => windows 10

eddiewu
Posts: 37
Joined: Wed Nov 25, 2020 9:10 am

Re: Simple problem but I can't figure out

Post by eddiewu » Mon Mar 22, 2021 12:49 am

I don't understand your question very well.
What do you mean by adding two adapters in the local bridge?
Anyway, make sure you know that there is a Linux kernel restriction that prohibits VPN client communicate with the host when the virtual hub is bridged to a physical adapter.
I am not exactly sure what your purpose is. If you just need to access the host from the VPN client, try setting up a local bridge with a virtual adapter instead of a physical one.

Post Reply