Softether using local bridge + dnsmasq

Post your questions about SoftEther VPN software here. Please answer questions if you can afford.
Post Reply
r0otkit
Posts: 6
Joined: Sat May 01, 2021 5:10 am

Softether using local bridge + dnsmasq

Post by r0otkit » Tue Jul 27, 2021 1:35 am

I set up my VPN server using local bridge + dnsmasq according to this website:
https://blog.lincoln.hk/blog/2013/05/17 ... al-bridge/

I can connect to my VPN server and getting IP from dnsmasq but can't access to the internet, although I can access to the internet using a built-in softether securenat feature

I found this topic on the internet but I don't think my VPS is Nat VPS like op of this topic

topic link : https://www.lowendtalk.com/discussion/9 ... net-access

thanks for reading

r0otkit
Posts: 6
Joined: Sat May 01, 2021 5:10 am

Re: Softether using local bridge + dnsmasq

Post by r0otkit » Tue Jul 27, 2021 2:09 pm

ok guys I think this is because of the nat problem how can I know if my VPS behind a nat ? and how can I find the internal IP address of it not my public one

bungal0w
Posts: 1
Joined: Wed Aug 04, 2021 2:54 pm

Re: Softether using local bridge + dnsmasq

Post by bungal0w » Wed Aug 04, 2021 2:58 pm

Hello,

The easiest way is to look at your VPS physical NIC. If the ip address stated in there some private ip address, it means your VPS uses NAT.


Thank you.

r0otkit
Posts: 6
Joined: Sat May 01, 2021 5:10 am

Re: Softether using local bridge + dnsmasq

Post by r0otkit » Sun Nov 07, 2021 1:43 pm

thanks i found this and i dont thing its related to private ips so there is no nat ?

ens192: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 00:50:56:b0:93:0c brd ff:ff:ff:ff:ff:ff
inet 136.243.xxx.xxx/24 brd 136.243.xxx.xxx scope global ens192
valid_lft forever preferred_lft forever
inet6 fe80::250:xxx:xxx0:xxxc/64 scope link
valid_lft forever preferred_lft forever

Shaike
Posts: 11
Joined: Mon Oct 04, 2021 6:37 pm

Re: Softether using local bridge + dnsmasq

Post by Shaike » Sun Nov 07, 2021 5:18 pm

hi
if the VM itself is not in NAT means that you cannot do it without VirtualNat enabled
i would recommend you to look here

Code: Select all

https://whattheserver.com/softether-vpnserver-with-port-forwarding/ 

Post Reply