SoftEther VPN User Forum

Hi I have been trying to connect to my VPN host form a VPN Client machine using RDP to 192.168.30.1 but with no success...any advise as to how to achieve it? I have Virtual NAT and Virtual DHCP on in my VPN Hub. Thanks in advance.

In your described SE configuration you do not RDP-connect to IP 192.168.30.1 but to an RDP address on SE Server's LAN subnet, eg 192.168.1.111

Hi. Thanks for your reply. Quick question. For example: If my SE client assigned my connection the IP address .30.11 and my server's local subnet is completely different (e.g. 50,22) would my SE hub connect me to it ? For routing purposes how would my local client PC would know to send packets to 50.22 through the SE tunnel ? Thanks again

Since you enabled Virtual NAT, your SE client's IP is masqueraded and appears as the SE server's IP on the LAN.

Hi thanks for your reply.

You wrote: "Since you enabled Virtual NAT, your SE client's IP is masqueraded and appears as the SE server's IP on the LAN." Since as mentioned my SE srver's IP is 192.168.50.22 then. I ask, in the Microsoft RDP client screen on my client PC what exactly should I type to connect via RDP to the server?

192.168.50.22

Check the routing at client side

Windows
tracert -d 1.1.1.1

Linux
traceroute -I 1.1.1.1



Further you need to push routes to the client if using split-tunneling