No Local Bridge - Secure Nat Traffic Traverse question
Posted: Wed Mar 27, 2024 9:25 pm
Hi Everyone, i would appreciate some experienced help! I've read many different conflicting information on the forums.
Lets say i have a network 192.168.30.0/24
I setup softether Server to use Secure nat which is using 192.168.32.0/24 (Virtual DHCP - Secure nat setting) to hand out IP addresses (not using local bridge)
(done this way for split tunnel on mobile devices)
VPN Clients on network 192.168.32.0/24 (VPN Client Network) can ping clients on 192.168.30.0/24 (Home LAN Network aka VPN Server network)
but in reverse 192.168.30.0/24 cannot ping clients on 192.168.32.0/24.
Is this because of the split tunnel? While using split tunnel will traffic only travel one way?
to clear all the basic issues. Ive disabled all firewalls and tested pinging via other methods. Ive tried everything under the moon for firewall routing rules to get local traffic to communicated with 192.168.32.0/24 to no success.
Here are my static route rules in Softether SecureNat - 192.168.30.0/255.255.255.0/192.168.32.254
Am i missing a static route in the softether software preventing traffic from clients from coming back into the network? Or is this simply by design?
Lets say i have a network 192.168.30.0/24
I setup softether Server to use Secure nat which is using 192.168.32.0/24 (Virtual DHCP - Secure nat setting) to hand out IP addresses (not using local bridge)
(done this way for split tunnel on mobile devices)
VPN Clients on network 192.168.32.0/24 (VPN Client Network) can ping clients on 192.168.30.0/24 (Home LAN Network aka VPN Server network)
but in reverse 192.168.30.0/24 cannot ping clients on 192.168.32.0/24.
Is this because of the split tunnel? While using split tunnel will traffic only travel one way?
to clear all the basic issues. Ive disabled all firewalls and tested pinging via other methods. Ive tried everything under the moon for firewall routing rules to get local traffic to communicated with 192.168.32.0/24 to no success.
Here are my static route rules in Softether SecureNat - 192.168.30.0/255.255.255.0/192.168.32.254
Am i missing a static route in the softether software preventing traffic from clients from coming back into the network? Or is this simply by design?