Ports to VPN Clients

[Galactic]

Hi All

This should be a simple one

I have SoftEther installed and working on a VPS with secure NAT enabled all working good

but i need to port forward a port from the ETH0 on the server to a particular VPN Client

Example below
Incomming
Public IP 10.44.55.147
Port 6000
Destination
VPN Client
IP: 192.168.8.10
Port: 6000

[Galactic]

Hi all

Any updates on this

[sky59]

What is the question?!

Edit: now I think you need router, what has SE to do with port forwarding? It is a tunnel not router

[Galactic]

I need to bridge the ETH0 Adapter to the VPN Client
to allow ports from the ETH0 adapter to communicate with the VPN Client Connected

[sky59]

Make picture, what you write does not make sense

[sky59]

can you explain (you understand) what "port forwarding" means for vpn tunnel?

I attach picture, where you needed port forwarding?

private-to-private-to-public-nat.png

[Galactic]

Hi All

sky has kind of got what i need

So SoftEther is installed on a VPS

I need if traffic hits the VPS Public IP on Port 6050 it needs to send that traffic to a particular user connected to the VPN example below

PUBLIC IP :6000 ------> VPN CLIENT (IP: 192.168.30.10)

[sky59]

This is done at router:
Public ip:6000----->192.168.1.1:6000

Device with running server connect to router:
On 192.168.1.1 is connected SE server

If SE server acts as a bridge then vpn connection is not accessible from piblic ip = this is the principle of vpn! To keep vpn separate from internet!!

You have to make picture what you want - i am afraid you do not know what you want