Hi,
I am trying to work out how to use local gateway for internet traffic instead of going over the vpn? but still use the VPN for devices on that network.
If I remove the default gateway from the secureNAT config this does it, but then I can not access IP addresses that are on the vpn?
Use local gateway
-
- Posts: 3
- Joined: Wed Apr 22, 2020 2:40 pm
Re: Use local gateway
dont worry!
Just worked it out with a static routing table entry
Just worked it out with a static routing table entry
-
- Posts: 477
- Joined: Tue Sep 11, 2018 5:58 pm
Re: Use local gateway
can you share how you defined that route? 0.0.0.0/0 via ????? or other way?
-
- Posts: 46
- Joined: Mon Apr 13, 2020 8:08 pm
-
- Posts: 3
- Joined: Wed Apr 22, 2020 2:40 pm
Re: Use local gateway
Hi,
Yes, I removed the default gateway, and then added a static route in the 'edit the static routing table to push' which was
10.10.0.1/255.255.255.0/10.10.10.50
(10.10.10.50 being the SoftEther VPN server IP address)
Yes, I removed the default gateway, and then added a static route in the 'edit the static routing table to push' which was
10.10.0.1/255.255.255.0/10.10.10.50
(10.10.10.50 being the SoftEther VPN server IP address)
-
- Posts: 477
- Joined: Tue Sep 11, 2018 5:58 pm
Re: Use local gateway
Thanx!
Should not it be
10.10.0.0/255.255.255.0/10.10.10.50
if we want to be 100% correct?
As 10.10.0.0 is network address.
Should not it be
10.10.0.0/255.255.255.0/10.10.10.50
if we want to be 100% correct?
As 10.10.0.0 is network address.