NT Domain Authentication Setting for Individual Users not working

[Talibanu]

Hi
I want to connect to VPN some users with authentification on an NT Domain, not all users.

If I put (on create newuser page ---> user name ) asterisk it will work but for all users from that NT Domain.
If i try to define a specified user, OK button is grayed as in picture.
Button OK become grayed if i put next characters on user name field: @ or \ or /
How to set only some users from NT Domain to be able to connect on this VPN?

Thanks

Cezar

[Afakename]

Hi Cezar;

It is assumed the SEVPN server is joined to AD

To add a user to the SEVPN authentication via AD

1. Open the virtual hub
2. Open Manager Users, select New
3. Under Auth Type, select NT Domain Authentication
4. Click to place a check mark on "Specify User Name on Authentication Server"
5. Enter the domain user to the "User Name on Authentication Server"
a) Example: adomainuser1
6. On the top of the page, under username, enter the same name as 5a)
7. Click OK
8. Configure the VPN client to use Radius/NT Domain Authentication
9. On the VPN client, the user name is the same as 5a) above

Hope this help,

[Talibanu]

Thanks
It works .
On the user name must be anything but without domain. Only a user name that will be substitute with second user+domain from "Specify User Name on Authentication Server" on security check



Good Luck

Cezar