what port need add at router?
SSL-VPN
L2TP/IPsec
OpenVPN
MS-SSTP
這4個VPN服務需要映射什麼的端口
SSL-VPN
L2TP/IPsec
OpenVPN
MS-SSTP
router Port Forwarding 路由器映射
-
kh_tsang
- Posts: 551
- Joined: Wed Jul 24, 2013 12:09 pm
Re: router Port Forwarding 路由器映射
Connect using SoftEther VPN Client:
1. UDP: NAT Traversal
2. SSL-VPN: the listening port set in the configuration
3. DNS packet: UDP Port 53
4. ICMP packet: Forward ICMP packet to the target server, routers may not have this function so DMZ may be needed
Connect by SSTP: Same as SSL-VPN above
Connect by OpenVPN: SSL-VPN ports + the ports that you have configured.
Connect by L2TP/IPsec: UDP 500 and 4500
You may refer to specs: http://www.softether.org/3-spec
1. UDP: NAT Traversal
2. SSL-VPN: the listening port set in the configuration
3. DNS packet: UDP Port 53
4. ICMP packet: Forward ICMP packet to the target server, routers may not have this function so DMZ may be needed
Connect by SSTP: Same as SSL-VPN above
Connect by OpenVPN: SSL-VPN ports + the ports that you have configured.
Connect by L2TP/IPsec: UDP 500 and 4500
You may refer to specs: http://www.softether.org/3-spec