these are output of ifconfig when connected:
L2TP/IPSec
Code: Select all
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
inet 192.168.10.162 netmask 255.255.255.255 destination 1.0.0.1
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 28 bytes 4914 (4.9 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 50 bytes 7176 (7.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Code: Select all
tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500
inet 192.168.10.173 netmask 255.255.255.255 destination 192.168.10.174
unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC)
RX packets 60 bytes 20851 (20.8 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 110 bytes 19472 (19.4 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Code: Select all
tap0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.10.191 netmask 255.255.255.0 broadcast 192.168.10.255
ether ee:49:36:21:d4:cd txqueuelen 100 (Ethernet)
RX packets 67 bytes 8520 (8.5 KB)
RX errors 0 dropped 11 overruns 0 frame 0
TX packets 32 bytes 3080 (3.0 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
what can i check to try to understand why SoftEther is slower then Endian and fix?
thanks